Alex

Description

Dialysis
Hospitalization
Semi-intensive care

Weighing system:

ALEX scale bed has an integrated weighing system, metrologically approved and at the top of accuracy, compliant to directive NAWI 2014/31/EU;
LCD digital display with 180° digital angle, easily readable even from 20 meters;
Automatic triple scale display:
- a) with a max load capacity of 200kg automatic displaying of the minimal division of 20g up to 60kg, 50g up to 150kg and of 100g up to 200kg;
- b) with a max load capacity of 300kg automatic displaying of the minimal division of 20g up to 60kg, 50g up to 150kg and of 100g up to 300kg;
Data transmission RS232 or LAN 10/100;
Compliance with the more common management softwares in use in hospitals with remote data acquisition;
IP44 display;
Anti-blackout function for weight data retention
Long-life external emergency battery;
Tare weight subtraction before the treatment and during the treatment;
Manual and automatic tare function;
Weighing system made out with electronic parts manufactured in Italy;
The LCD display allows to keep the following parameters visible:
- hour; weight of the patient; inserted tare weight; inserted or removed weight; weight reduction routine; countdown for weight reduction routine; max load; weight / date / therapy’s starting time; motors movimentation; scale stabilization; weight reduction alarm; bed exit alarm; alert for programmed maintenance;
Buttons for the movement of the device located on the display;
Stainless steel load cells with a max load of 1000kg and an overload capacity of 2000kg.

Reinforced frame in S235JR steel, made stainless through a treatment with thermosetting epoxy paint;
Bed sections covered in thermoformed removable ABS easy to sanificate;;
The bed structure is designed in order to be easily cleanable;
Thermoformed ABS base cover;
Resistant to scratch and to all the chemical substances used in hemodialysis therapy;
Quick release emergency lever;
Low voltage spline motors;
Total absence of mechanism and leverism underneath the bed surface for an efficient sanification;
Ergonomic patient surface;
Emergency power supply system by rechargeable batteries. 10 cycles duration.
Lightweight and easily removable Head/foot panels;;
Clearance suitable for patient hoist;
Easy access to clean the floor underneath the bed;
Rototranslation of the back section for cardiac chair position;
Scale bed also available with stainless stell base;
Patient surface height 42cm. High performing with telescopic height adjustment columns and integrated scale system;
High load wheels allow easy movement even while the patient is on the bed;
Side barrier predisposition;;
Any parts or component of the bed are subject to wear and tear;
Absence of parts that need to be greased;
Available in 4 different sizes;
Customizable colours;
Latex free;
Phtalates free.

Quick release of the back section for CPR, code AC8L;
Low voltage motors with spline system, code AC70;
4 sections, 3 joints;
Motorized back section 0-70°;
Motorized femoral section 0-30°;
Movimentation of the leg section by gas spring, synchronized with the leg section 0-35°;
Epoxy painted (colour chart available);
Equipotential node;
Emergency battery, code AC17L;
Head and foot board in thermoplastic material with HPL panel, code AC65;
Surface covered with ABS removable panels;
Height adjustament column;
Height of the patience surface 420mm;
CPR position, code AC62;
Motorized Trendelenburg and reverse trendelenburg carried out by motorized telescopic columns;
Synchronous 11cm translation of the backrest to avoid chest compression;
n°4 bumpers;
Predisposition for IV pole, patient lifter and armrest;
Bag holders;
Braking device on two bars with directional system. Activated by bilateral pedals, code AC7L1G;
Handset inhibition key, code AC34L;
No-marking swivable wheels, 150mm diameter;
Integrated weighing system with manual and automatic tare function and weight reduction;
10 buttons handset.